Cisco 12016 교체 지침 매뉴얼 - 페이지 15

{카테고리_이름} Cisco 12016에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 12016 32 페이지. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Cisco 12016에 대해서도 마찬가지입니다: 포장 풀기 사용 설명서 (28 페이지), 데이터시트 (9 페이지), 사용 설명서 (16 페이지), 교체 지침 매뉴얼 (18 페이지)

페이지 인쇄

Tilt the safety hand truck onto its outrigger wheels to move the chassis to a level, open space with a solid

Step 8

floor, where the chassis can be repackaged for shipping.

If you plan to return the defective chassis to the factory, repackage it in the original shipping container

or a replacement shipping container acquired from Cisco. For information on repackaging the chassis,

see the

and the

Installing the Replacement Chassis

Procedures for installing the replacement chassis are described in the following sections:

•

Positioning the Replacement Chassis for Insertion into the Rack

Position the replacement chassis and scissor-jack platform in front of the rack with the back panel of the

chassis facing the rack opening, and the back of the scissor-jack platform butted against the

rack-mounting platform in the rack. (See

Figure 9

platform (closed)

78-16082-01

"Reinstalling the Chassis and Scissor-Jack Platform in the Shipping Pallet" section on page 23

"Packaging the Replaced Chassis for Shipment" section on page

Positioning the Replacement Chassis for Insertion into the Rack, page 15

Inserting the Chassis into the Rack, page 16

Reattaching Supplemental Bonding and Grounding Connections, page 20

Reattaching the Vertical Cable-Management Troughs, page 21

Completing the Installation, page 21

Positioning the Chassis to Insert It into the Rack

Front panel

of chassis

Scissor-jack

Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions

Figure

9.)

Rear panel

of chassis

Rack-mounting

Removing and Installing the Chassis

23.

Rack

platform