Cisco 1600 series 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Cisco 1600 series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1600 series 8 페이지. Rdiag router analog ipsec
Cisco 1600 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 매뉴얼 설치 또는 교체 (10 페이지), 하드웨어 설치 매뉴얼 (14 페이지)

페이지 인쇄
Cisco 1600 series 빠른 시작 매뉴얼

Install the Router.

There are three steps to installing your router:
Warning
Hazardous network voltages are present in WAN interface card ports regardless of whether
power to the router is OFF or ON. To avoid electric shock, use caution when working near WAN ports.
When detaching cables, detach the end away from the router first.
A. Connect the router to your local Ethernet network(s). The router can be connected to one or two local
networks.
B. Install a WAN interface card. The router cannot make any connections outside the local network unless a
WAN interface card is installed and connected. Without a WAN interface card installed, the router does function
correctly between two local networks.
C. Connect the power supply. After you connect the power, you can confirm proper installation by checking that
certain LEDs are on.
3