Cisco 1602 사용자 설명서 - 페이지 2
{카테고리_이름} Cisco 1602에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1602 13 페이지. 1600 series
페이지 인쇄Cisco 1600 Series Router Architecture
Document ID: 5406
Introduction
Prerequisites
Requirements
Components Used
Conventions
Hardware Overview
Cisco 1601
Cisco 1602
Cisco 1603
Cisco 1604
Cisco 1605
Block Diagram
Memory Details
DRAM
PCMCIA Flash
NVRAM
BOOT ROM
Registers
Sample Output
Boot Sequence
Packet Switching
Switching Paths
1 − Receive the packet
2 − Switch the Packet
3 − Transmit the Packet
NetPro Discussion Forums − Featured Conversations
Related Information
Introduction
This document provides an overview of the hardware and software architecture of the Cisco 1600 Series
Routers.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco 1600 Series Routers.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
Cisco − Cisco 1600 Series Router Architecture