Cisco 1721 - VPN Security Router Bundle 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Cisco 1721 - VPN Security Router Bundle에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1721 - VPN Security Router Bundle 17 페이지. Troubleshooting guide
Cisco 1721 - VPN Security Router Bundle에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (11 페이지), 데이터시트 (12 페이지), 사용자 설명서 (48 페이지), 하드웨어 문제 해결 (12 페이지)
페이지 인쇄
Complete the information below, and keep it for reference.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number
2
Overview
This document describes the steps for installing your Cisco 1721 router with its complement of WAN interface cards (WICs).
Additional documentation can be found on Cisco.com.
Product Serial Number Location
The serial number label for Cisco 1721 router is located on the rear of the chassis, to the right of the power switch.
3
Parts List
Your router package should include the following items:
• One Cisco 1721 router
• One blue RJ-45-to-DB-9 console cable
• One DB-9-to-DB-25 adapter
• One black power supply
• One black power supply cord
• Product documentation
Items You Need to Provide
Depending on your network environment, you may need to provide some of the following items to install the router:
• Ethernet hub or switch to connect the router to the local network
• Straight-through Ethernet cables (RJ-45-to-RJ-45) to connect the router to a broadband (xDSL or cable) modem and to a
hub or switch
• Cisco WIC(s), if you did not order the router with WICs already installed
• Cables to connect WICs to the appropriate WAN services
• External NT-1 or data service unit/channel service unit (DSU/CSU), if needed, to connect a WIC to WAN services
4
Connect the Power Supply
Follow these steps to connect the router to the power supply:
Connect the attached power supply cord to the power socket (labeled +5, +12, -12 VDC) on the back panel of the
Step 1
router, as shown in Figure 1.
3