Cisco 1751 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Cisco 1751에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1751 35 페이지. Modular access router
Cisco 1751에 대해서도 마찬가지입니다: 솔루션 개요 (16 페이지), 데이터시트 (19 페이지)
페이지 인쇄
Figure 8
Kensington-compatible
Slot 1
OK LED
Figure 9
Figure 9
VIC
E&M
Example
If you install a VIC in both SLOT 0 and SLOT 1 of the router, the ports in each of these slots would be
numbered as follows:
SLOT 0—0/0 and 0/1
SLOT 1—1/0 and 1/1
Cisco Router and Security Device Manager
Cisco Router and Security Device Manager (SDM) is a web-based configuration tool that allows
you to configure LAN and WAN interfaces, routing, Network Address Translation (NAT),
firewalls, VPNs, and other features on your router. If SDM is installed on your router, configure
the router by following the instructions in the Cisco Router and Security Device Manager (SDM)
Quick Start Guide. If this document was not shipped with your router, you can obtain SDM and
instructions for installing it on your router from the following location:
http://www.cisco.com/pcgi-bin/tablebuild.pl/sdm
78-11259-05
Cisco 1751 Router Slot Numbering
WIC/VIC
locking socket
slot 1
VIC
2FXS
1
SEE MANUAL BEFORE INSTALLATION
SLOT 1 OK
SLOT 0 OK
Slot 0
WIC/VIC
OK LED
slot 0
FDX/100/LINK LEDs
shows the VIC port numbering.
VIC Port Numbering
VIC port 1
1
SEE MANUAL BEFORE INSTALLATION
Console port
Model Cisco 1751
SLOT 1
SLOT 2
VIC
2FXO
0
CONSOLE
SLOT 0
FDX
100
LINK
AUX
10/100 ETHERNET
10/100-Mbps
Ethernet port
Ground
wire
Auxiliary port
VIC port 0
0
Cisco 1751 Voice-over-IP Quick Start Guide
Cisco Router and Security Device Manager
VIC
Power switch
slot 2
THIS SLOT
ACCEPTS
ONLY VOICE
INTERFACE
CARDS
1
0
SEE MANUAL BEFORE INSTALLATION
PVDM OK
MOD OK
SLOT 2 OK
+5, +12, -12 VDC
PVDM
Slot 2
OK LED
OK LED
MOD
Power
OK LED
socket
9