ActronAir RC-03 운영 매뉴얼 - 페이지 6

{카테고리_이름} ActronAir RC-03에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ActronAir RC-03 16 페이지.

페이지 인쇄

Operation Manual

05. Basic Functions

05.01. Mode Operation

NOTE

Setting Temperature Operation

• The operating temperature range for units is 16-30

• You can increase or decrease the set temperature in 0.5

C increments.

AUTO Mode

In AUTO mode, the unit will automatically select the COOL, FAN or HEAT function

based on the set temperature.

button to select AUTO.

1. Press the

2. Set your desired temperature using the

3. Press the

button to start the unit.

NOTE

FAN SPEED is disabled in AUTO mode.

COOL Mode

In COOL mode, the unit will cool the room to the desired temperature.

1. Press the

button to select COOL mode.

2. Set your desired temperature using the

3. Press the

button to select the fan speed in a range of Auto-100%.

4. Press the

button to start the unit.

HEAT Mode

1. Press the

button to select HEAT mode.

2. Set your desired temperature using the

3. Press the

button to select the fan speed in a range of Auto-100%.

4. Press the

button to start the unit.

NOTE

As outdoor temperature drops, the performance of your unit's HEAT function may

be affected. The system may also enter a defrost mode during the heating cycle.

DRY Mode (Dehumidifying)

1. Press the

button to select DRY mode.

2. Set your desired temperature using the

3. Press the

button to start the unit.

NOTE

The Fan Speed is automatically set to AUTO while in the DRY mode.

Operation Manual - RC-03 Controller

Document: 9590-4017 Ver. 1 220318

Remote Controller

buttons

buttons.

buttons