Cisco 1800 Series 빠른 시작 매뉴얼 - 페이지 22

{카테고리_이름} Cisco 1800 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1800 Series 28 페이지. Cisco ios software configuration
Cisco 1800 Series에 대해서도 마찬가지입니다: 데이터시트 (16 페이지), 구성 (32 페이지)

페이지 인쇄

Note

To avoid losing work you have completed, be sure to save your configuration occasionally as you proceed. Use

the copy running-config startup-config command to save the configuration to NVRAM.

Step 6

When you have finished the initial configuration, verify the initial configuration. See the "Verify the Initial

Configuration" section on page 22 for verification procedures.

Verify the Initial Configuration

To verify that the new interfaces are operating correctly, perform the following tests:

• To verify that the interfaces are operating correctly and that the interfaces and line protocol are in the correct state—up or

down—enter the show interfaces command.

• To display a summary status of the interfaces configured for IP, enter the show ip interface brief command.

• To verify that you configured the correct host name and password, enter the show configuration command.

When you complete and verify the initial configuration, your Cisco router is ready to configure for specific functions. See the

"Where to Go Next" section on page 22 for information about locating documentation for advanced configuration procedures.

Where to Go Next

For additional configuration procedures, refer to the appropriate Cisco 1800 series routers documentation or Cisco IOS

software documentation, available online on Cisco.com.

Tip

See the "Obtaining Documentation" section on page 22 for help in locating these documents.

To access documentation on Cisco.com

For Cisco 1841 router platform documentation, begin at Cisco.com at http://www.cisco.com, and select Products & Solutions >

Routers > 1800 Series Integrated Services Routers> Technical Documentation > Document type > Document.

For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and select Products & Solutions > IOS

Software > Cisco IOS Software Releases > Your Cisco IOS software release.

To get updated information about platform support for features, access Feature Navigator II at http://www.cisco.com/go/fn.

(Requires a registered account on Cisco.com.)

To access documentation using Cisco Connection Online (CCO):

For Cisco 1800 series routers platform documentation, start on Cisco.com at http://www.cisco.com, and click the Technical

Documentation tab under Quick Links. Under the Product Documentation heading, navigate to Modular Access Routers and

to the documentation for your router.

For Cisco IOS software documentation, start on Cisco.com at http://www.cisco.com, and click the Technical Documentation

tab under Quick Links. Under the Product Documentation heading, navigate to the Cisco IOS software documentation for the

Cisco IOS software release that is installed on your router.

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical

assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.