Cisco 1801 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Cisco 1801에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1801 18 페이지. Integrated services routers cabling and installation
Cisco 1801에 대해서도 마찬가지입니다: 데이터시트 (16 페이지)

페이지 인쇄

1. Connecting the Router

Figure 1

Items Included with the Cisco 1801, Cisco 1802, and Cisco 1803 Integrated Services Router

Cisco 1801, Cisco 1802, or Cisco 1803 router

Power cable

Console cable (light blue, RJ-45 to DB-9)

The shipment should include the following items:

• One Cisco 1801, Cisco 1802, or Cisco 1803 router

• One blue RJ-45-to-DB-9 console cable

• One DB-9-to-DB-25 adapter

• One black power supply cord

• One Power over Ethernet (PoE) power supply, if the router was purchased with the PoE option

• Product documentation

• One CD-ROM containing Cisco Router and Security Device Manager (SDM)

• One antenna kit (optional)

Items You Need to Provide

Depending on your network environment, you may need to provide some of the following items so that you can install the

router:

• An ADSL or G.SHDSL cable to connect the router to the service provider

• Straight-through Ethernet cables (RJ-45-to-RJ-45) to connect the router to an Ethernet hub or switch, or to a computer with

a network interface card (NIC)

• Server or other computer with a NIC or other networked device (such as a hub or a switch) to connect to the integrated

8-port 10/100-Mbps Ethernet switch

PoE power supply and cable (optional)

DB-9 to DB-25 adapter

Product documentation