Cisco 1840 사용자 설명서 - 페이지 9

{카테고리_이름} Cisco 1840에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1840 16 페이지. Digital interactive set-top

Step-By-Step Connection Instructions

To connect your 1840 to your entertainment devices, complete these steps.

POWER

Automatic Software Updates

Upon power-up, the TV screen may occasionally display a message that indicates the

1840 is automatically updating its software. Wait for the time to display on the front

panel of your 1840. When the front panel displays the time, the update is complete.

Connect the coaxial cable that carries the signal from your cable service

provider to the CABLE IN connector on the back panel of the 1840.

To connect your SDTV to the 1840, see the connection diagrams

beginning on page 12. Select the conﬁ guration that best matches your

entertainment devices.

Plug the 1840 and the TV into an AC power source.

Important: To protect the 1840 from power surge damage, ground

(earth) your cable product to provide some protection against

voltage surges and built-up static charges. To avoid these voltage

surges that can be caused by lightning storms and power outages,

plug the 1840 into a surge protector to reduce the risk of damage.

Do not turn on the 1840 or TV yet. It may take several minutes for

the 1840 to receive the latest software, programming, and service

information. Wait until you see one of the following displays on the

front panel of the 1840 that indicates that the update is complete:

• Current time

Note: If four dashes are displayed, you must call your cable service

provider to get the 1840 authorized.

It may take several minutes for the set-top to receive the latest

software, programming, and service information. When the Power

light on the front panel stops ﬂ ashing, that is your indication that the

programming update is complete.

To begin watching TV, turn the TV ON, and press POWER on the

front of the 1840, or press Power on the remote control.

• Four dashes (- - - -)