Cisco 1841 - 3G Bundle Router 사용자 설명서

{카테고리_이름} Cisco 1841 - 3G Bundle Router에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1841 - 3G Bundle Router 9 페이지. Integrated services router with aim-vpn/bpii-plus integrated services router with aim-vpn/epii-plus fips 140-2 non proprietary security policy
Cisco 1841 - 3G Bundle Router에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (28 페이지), 데이터시트 (11 페이지), 사용자 설명서 (29 페이지)

페이지 인쇄

Power-Up Procedures for Cisco 1800 Series

Routers (Modular)

This chapter describes how to power up Cisco 1800 series integrated services routers (modular) and

perform an initial configuration to provide network access. It includes the following sections:

Powering Up Cisco 1800 Series Routers, page 7-1

Verifying the LED Indicators on the 1841 Router, page 7-4

Verifying the Hardware Configuration, page 7-5

Initial Configuration of the Router, page 7-5

Software Components of the Cisco 1861 Integrated Services Router, page 7-7

To see translations of the warnings that appear in this publication, see the

Note

Safety Information for Cisco 1840

The Cisco 1861 Integrated Services Router supports a maximum of 12 user licenses based on different

Note

models.

Powering Up Cisco 1800 Series Routers

The plug-socket combination must be accessible at all times because it serves as the main

Warning

disconnecting device. Statement 1019

Blank faceplates and cover panels serve three important functions: they prevent exposure to

Warning

hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)

that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not

operate the system unless all cards, faceplates, front covers, and rear covers are in place.

Statement 1029.

To ensure adequate cooling, never operate the router unless the unit is completely closed.

Caution

OL-5876-03

C H A P T E R

Routers.

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

Regulatory Compliance and

7-1