Epson EMP-6100 사용자 설명서 - 페이지 3

{카테고리_이름} Epson EMP-6100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-6100 25 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP-6100에 대해서도 마찬가지입니다: 사양 (1 페이지), 운영 매뉴얼 (14 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄
Epson EMP-6100 사용자 설명서

1. Introduction to ESC/VP21

ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and
monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be
understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper
terminal.
Since ESC/VP21 is independent of communication protocols. Serial, USB or TCP/IP network can be used to transmit the
commands to projectors.
* Serial connection
A/V controller normally use as serial connection to control projectors. Refer to Appendix for details.
* USB connection
A USB interface can be used to control a projector. Refer to Appendix for details.
* Network connection
After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/VP.net protocol manual
ESC/VP21 Command User's Guide for Business Projectors
ESC/VP21 ƒRƒ}ƒ"ƒh Žg—p ƒKƒCƒh