Cisco 2500 Series 구성 매뉴얼 - 페이지 35

{카테고리_이름} Cisco 2500 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 50 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 배포 매뉴얼 (23 페이지), 시작하기 매뉴얼 (47 페이지)

페이지 인쇄

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

DFS Channels

If DFS channels are used in the deployed network, in the navigation pane under 802.11a/n,

select DFS (802.11h). Check the Channel Announcement radio box to cause the AP to

advertise Spectrum Management. If the AP does not advertise Spectrum Management,

Spectralink handsets will not connect on DFS channels (bandwidth shared with radar facilities).

Media (Voice/Video)

For 84-Series handsets Admission Control (ACM) must be enabled on both the Voice and Video

AC when the handset is configured for Admission Control Mandatory. PIVOT handsets support

Admission Control on version 1.5 and later.

To enable Admission Control (ACM):

In the navigation pane underneath 802.11 a/n, select Media, then select the Voice tab.

Select the Admission Control (ACM) checkbox. If CAC Method is available, select

Static from the drop down list. Set the Max RF Bandwidth to 55 to limit the bandwidth

allocated to handsets to a value tested to provide good performance. If available,

ensure that the Reserved Roaming Bandwidth is set to 6%.

721-1001-000-AH.docx

December 2016