Software
Table 6 describes the primary features of the Cisco Video Surveillance 2600 IP Camera software.
Table 6.
Item
Video Format
Day/night Settings
Image Settings
Overlay Capabilities
Selectable Bit Rate
IP Filtering
*
Discovery
Configuration
Activity Detection
Event Actions
Note:
Features with an asterisk are not supported or applicable when the camera is used with Cisco Video
Surveillance Manager.
Specifications
Table 7 provides specifications of the Cisco Video Surveillance 2600 IP Camera.
Table 7.
Item
Housing
LEDs
Dimensions
(L x W x H)
Weight
Certifications
Operating Temperature
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Cisco Video Surveillance 2600 IP Camera Primary Software Features
Specification
NTSC and PAL
Auto or manual day/night operation with user-definable thresholds
Configurable brightness, sharpness, saturation, and white balance
Time, date, and text
Support for Constant Bit Rate or Variable Bit Rate
Users can enter a list of allowed or blocked IP addresses for viewing video and configuring camera settings
Cisco Discovery Protocol, Bonjour zero-configuration discovery
● Browser-based using Internet Explorer 8
● Multiple user access levels with password protection
4 user-definable motion detection areas
● Email
● FTP upload of captured video or JPEG snapshot depending on stream configuration
● HTTP alert
● Alarm output
Cisco Video Surveillance 2600 IP Camera Specifications
Specification
Aluminum
Power, Ethernet link, and activity
● 4.96 x 3.15 x 2 in.
● 126 x 80 x 50 mm
● 1.15 lb
● 0.52 kg
Safety:
IEC 60950-1:2001
EN 60950-2:2001 +A11:2004
● 32 to 122° F
● 0 to 50° C
EMC-Emissions:
FCC Part 12 Subpart B, Class B
CISPR22 Class B
ICES-003, Class B
ANSI C63.4
EN55022: Class B
EN61000-3-2
EN61000-3-3
Data Sheet
EMC-Immunity:
EN55024
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Page 4 of 6
페이지 인쇄