Cisco 2600 Series 설치 매뉴얼 - 페이지 11

{카테고리_이름} Cisco 2600 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600 Series 22 페이지. Configuring adsl wic to support pppoe clients
Cisco 2600 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 릴리스 정보 (32 페이지), 구성 (15 페이지), 애플리케이션 노트 (41 페이지), 데이터시트 (6 페이지), 부록 (15 페이지), 개요 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지)

페이지 인쇄
Cisco 2600 Series 설치 매뉴얼
Chapter 3
Installing the Router
Use 19-inch brackets (shown in
Note
the most stable installation for the chassis.
To wall-mount the chassis:
Attach the brackets as shown in
Step 1
Figure 3-17 Attaching the Wall-Mount Brackets
0
Attach the chassis assembly to the wall as shown in
Step 2
provide. We recommend the following:
For the best support of the chassis and cables, attach the brackets so that the screws align with a
•
vertical wall stud. (See
the wall when cables are attached.
For the best ventilation of the chassis, mount the chassis with the power supply and fan at the top.
•
Make sure there is clearance between the router and the wall.
OL-2171-02
Figure
3-4) to wall-mount the chassis. The small brackets provide
Figure
3-17.
Figure
Figure
3-18.) This position will prevent the chassis from pulling away from
Cisco 2600 Series Routers Hardware Installation Guide
Setting Up the Chassis
3-18, using screws and anchors that you
3-11