Cisco 2600 Series 설치 매뉴얼 - 페이지 14

{카테고리_이름} Cisco 2600 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600 Series 22 페이지. Configuring adsl wic to support pppoe clients
Cisco 2600 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 릴리스 정보 (32 페이지), 구성 (15 페이지), 애플리케이션 노트 (41 페이지), 데이터시트 (6 페이지), 부록 (15 페이지), 개요 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지)

페이지 인쇄

Connecting the DC Power Supply

Figure 3-19 DC-Input Power Supply Terminal Block

On/off

switch

Strip 3/16 in. of shielding from the free end of each power lead wire that is attached to the DC-input

Step 3

power supply.

Step 4

Insert the three power leads into the slotted wire receptacles on the terminal block. (See

The illustration shows the DC power supply terminal block. The proper wiring sequence is ground

Warning

to ground, positive to positive (line to L), and negative to negative (neutral to N). Note that the

ground wire should always be connected first and disconnected last. To see translations of the

warnings that appear in this publication, refer to the Regulatory Compliance and Safety

Information document that accompanied this device.

Cisco 2600 Series Routers Hardware Installation Guide

3-14

Positive

Ground

Negative

Chapter 3

Installing the Router

Figure

3-20.)

OL-2171-02