Epson EMP-7850 운영 매뉴얼 - 페이지 32

{카테고리_이름} Epson EMP-7850에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-7850 41 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP-7850에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (20 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (25 페이지), 브로셔 및 사양 (4 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄
Epson EMP-7850 운영 매뉴얼
Setting, Monitoring and Controlling from a Computer
Network setup items that can be set by the Web browser
All Network Screen settings can be changed, however, the "MAC address"
setting will not be displayed.
TIP
When connected to a wired LAN, "Wired LAN Settings" will not displayed.
The content of the various items is the same as that of the Network
advanced setting screen of Network Screen. s"Connecting Using Easy
Connect Mode" and "Connecting in Access Point Mode or Wired LAN
Connection Mode" in the EasyMP Setup Guide
The WEP encryption setting from the Web browser can be keyed in not
only in hexadecimal, but also in text. The method for setting the WEP
encryption by keying in text differs depending on the access point. For this
reason, please check with the administrator of the network you are joining.
Then, please first select "Text 1" as the input "Format" before attempting to
setup the WEP encryption. Try "TEXT2" and "TEXT3" if "TEXT1" does
not provide proper encoding.
If "128bit" is selected in "WEP encryption", you can only select "0" as the
Key ID. If "40bit" is selected, you can select either "0", "1", "2", or "3".
f Projector Control
Easy Remote can be used to control the projector in the same way as the
remote control.
The functions of each of the icons are explained below.
DVI
Has the same function as the [DVI] button on the remote control.
This switches to the signal source being input from the [DVI] port.
Comp
Has the same function as the [Comp] button on the remote control.
This switches to the signal source being input from the [Computer]
port.
EasyMP
Has the same function as the [EasyMP] button on the remote
control. This switches between projecting images and the EasyMP
screen.
BNC
Has the same function as the [BNC] button on the remote control.
This switches to the signal source being input from the [BNC] port.
S-Video
Has the same function as the [S-Video] button on the remote
control. This switches to the signal source being input from the [S-
Video] port.
Video
Has the same function as the [Video] button on the remote control.
This switches to the signal source being input from the [Video]
port.
Freeze
Has the same function as the [Freeze] button on the remote control.
This pauses the image. However, audio does not stop. Click again
to release the pause. This is the same as the Freeze function on the
projector.
A/V Mute
Has the same function as the [A/V Mute] button on the remote
control. This temporarily hides images and stops audio. Click again
to release. This is the same as the A/V Mute function on the
projector.
EasyMP Operation Guide
31