Cisco 2620XM 운영 - 페이지 7

{카테고리_이름} Cisco 2620XM에 대한 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2620XM 25 페이지. Modular access routers with aim-vpn/ep fips 140-2 non-proprietary security policy

페이지 인쇄

Table 3

Router Physical Interface

10/100BASE-TX LAN Port

WIC Interface

Network Module Interface

LAN Port LEDs

10/100BASE-TX LAN Port LEDs

Power LED

Redundant Power LED

Activity LED

Console Port

Auxiliary Port

Power Plug

Roles and Services

Authentication is role-based. There are two main roles in the router that operators may assume: the

Crypto Officer role and the User role. The administrator of the router assumes the Crypto Officer role

in order to configure and maintain the router using Crypto Officer services, while the Users exercise only

the basic User services. Both roles are authenticated by providing a valid username and password. The

configuration of the encryption and decryption functionality is performed only by the Crypto Officer

after authentication to the Crypto Officer role by providing a valid Crypto Officer username and

password. Once the Crypto Officer configured the encryption and decryption functionality, the User can

use this functionality after authentication to the User role by providing a valid User username and

password. The Crypto Officer can also use the encryption and decryption functionality after

authentication to the Crypto Officer role. The module supports RADIUS and TACACS+ for

authentication and they are used in the FIPS mode. A complete description of all the management and

configuration capabilities of the Cisco 2621XM and 2651XM Routers can be found in the Performing

Basic System Management manual and in the online help for the router.

The User and Crypto Officer passwords and the RADIUS/TACACS+ shared secrets must each be at least

8 alphanumeric characters in length. See the

section on page

PIN, the probability of randomly guessing the correct sequence is 1 in 1,814,400. Including the rest of

the alphanumeric characters drastically decreases the odds of guessing the correct sequence.

Crypto Officer Services

During initial configuration of the router, the Crypto Officer password (the "enable" password) is

defined. A Crypto Officer may assign permission to access the Crypto Officer role to additional

accounts, thereby creating additional Crypto Officers.

The Crypto Officer role is responsible for the configuration and maintenance of the router. The Crypto

Officer services consist of the following:

•

Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy

OL-6262-01

Cisco 2621XM and Cisco 2651XM FIPS 140-2 Logical Interfaces (continued)

17, for more information. If only integers 0-9 are used without repetition for an 8 digit

Configure the router—define network interfaces and settings, create command aliases, set the

protocols the router will support, enable interfaces and network services, set system date and time,

and load authentication information.

FIPS 140-2 Logical Interface

Status Output Interface

Power Interface

"Secure Operation of the Cisco 2621XM/2651XM Router"

The 2621XM/2651XM Router