Epson EMP-811 - XGA LCD Projector 빠른 설정 - 페이지 2

{카테고리_이름} Epson EMP-811 - XGA LCD Projector에 대한 빠른 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-811 - XGA LCD Projector 2 페이지. Epson powerlite 600p: quick start

페이지 인쇄

djust the image

Rotate the focus ring to sharpen the image.

If you see a blank screen

Note:

see the box below.

Rotate the zoom ring to reduce or enlarge the image.

(You can also move the projector closer to or farther

from the screen.)

If you see a blank screen or the No Signal message

after turning on your laptop, check the following:

Make sure the

power light is green and

not flashing and the lens cover is off.

Try turning off the laptop and restarting it.

If you've connected more than one computer and/or video source,

you may need to press the Computer/YCbCr or Video button on top

of the projector. (Allow a few seconds for the projector to sync up

after pressing it.)

Make sure your cable is connected securely.

If you're using a Windows laptop:

Press the function key that lets you display on an external monitor.

It may have an icon such as

You may have to hold down the Fn (function) key while pressing it.

(Allow a few seconds for the projector to sync up after pressing it.)

Check your laptop's manual or online help for details.

On most systems, the

the LCD screen and the projector, or display on both at the

same time.

You might need to use the Display utility in the Control Panel

to enable both the LCD screen and external monitor port.

EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc.

zoom ring

focus ring

after focusing,

No signal

If you see a blank screen

No signal

, or it may be labelled CRT/LCD.

or CRT/LCD key lets you toggle between

EPSON PowerLite 600p/811p/820p

Raise the image as needed. To do this, press the foot release

button and lift the front of the projector. Once the image is

positioned where you want it, release the button to lock the

foot in position. If you need to straighten the image, rotate

the round adjustable foot at the back of the projector.

If your image looks like

(vertical Keystone) button to correct the shape of the image.

If your image looks like

at an angle to the screen. Move it directly in front of the center

of the screen, facing the screen squarely. Or press the Tracking+

or Tracking– (horizontal Keystone) button to correct the shape.

If you're using Macintosh

1. From the Apple

menu, select Control Panels, then click Monitors

or Monitors and Sound.

2. Click the Arrange icon.

click here

3. Drag one monitor icon on top of the other. This lets you display

on the projector screen as well as the LCD screen.

If this option isn't available, you may need to select one of the

Simulscan resolution settings:

1. Perform step 1 above, if necessary.

2. Click the Monitor icon.

click here

3. Select a Simulscan resolution as shown. (Allow a few seconds for

the projector to sync up after making the selection.)

If you're using Macintosh OS X, see "Solving Problems" in

your User's Guide.

Quick Setup

back

adjustable

foot

, press the Sync+ or Sync–

, you've placed the projector

OS 9.x:

drag one monitor icon

on top of the other

select a Simulscan

resolution

CPD-13952R1