Cisco 2811 Series 운영 - 페이지 11
{카테고리_이름} Cisco 2811 Series에 대한 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2811 Series 31 페이지. 2800 series integrated services routers
Cisco 2811 Series에 대해서도 마찬가지입니다: 데이터시트 (20 페이지), 설치 및 업그레이드 (14 페이지), 운영 (31 페이지), 빠른 시작 매뉴얼 (47 페이지)
페이지 인쇄
Table 8
10/100 Ethernet LAN Port LEDs
AIM LEDs
PVDM LEDs
Power LED
Activity LEDs
Auxiliary LED
Compact Flash LED
Console Port
Auxiliary Port
Main Power Plug
Redundant Power Supply Plug
There are two USB ports but they are not supported currently. The ports will be supported in the future
for smartcard or token reader.
The CF card that stored the IOS image is considered an internal memory module. The reason is the IOS
image stored in the card cannot be modified or upgraded. The card itself must never be removed from
the drive. Tamper evident seal will be placed over the card in the drive.
Roles and Services
Authentication in Cisco 2811 and Cisco 2821 is role-based. There are two main roles in the router that
operators can assume: the Crypto Officer role and the User role. The administrator of the router assumes
the Crypto Officer role in order to configure and maintain the router using Crypto Officer services, while
the Users exercise only the basic User services. The module supports RADIUS and TACACS+ for
authentication. A complete description of all the management and configuration capabilities of the router
can be found in the Performing Basic System Management manual and in the online help for the router.
User Services
Users enter the system by accessing the console port with a terminal program or via IPSec protected
telnet or SSH session to a LAN port. The IOS prompts the User for username and password. If the
password is correct, the User is allowed entry to the IOS executive program.
The services available to the User role consist of the following:
•
•
•
•
OL-8663-01
Cisco 2821 FIPS 140-2 Logical Interfaces (Continued)
Status Functions—View state of interfaces and protocols, version of IOS currently running.
Network Functions—Connect to other network devices through outgoing telnet, PPP, etc. and
initiate diagnostic network services (i.e., ping, mtrace).
Terminal Functions—Adjust the terminal session (e.g., lock the terminal, adjust flow control).
Directory Services—Display directory of files kept in flash memory.
Cisco 2811 and Cisco 2821 Integrated Services Router FIPS 140-2 Non Proprietary Security Policy
Status Output Interface
Power Interface
Cisco 2811 and Cisco 2821 Routers
11