Epson EMP-8300 빠른 참조 매뉴얼 - 페이지 4
{카테고리_이름} Epson EMP-8300에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-8300 16 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP-8300에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지), 사용자 설명서 (24 페이지), 보충 설명서 (2 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)
페이지 인쇄
Projection Preparation and Adjustments
Set the [R/C] switch
to "ON".
Turn the power on
for all input
equipment.
Press the
button.
When the power is first
turned on after attaching the
standard lens or wide angle
zoom lens, continue with the
configuration menu "Reset
All".
If you do not select "Reset
All", the images may appear
slightly dark.
User's Guide
"Reset All Menu"
Check that the power cable is connected to the projector and
to the electrical outlet.
With the EMP-9300, if you change the setting for the "Direct
Power ON" command in the "Advanced2" menu to "ON", the
projector's power will turn on and projection will start at once
when you insert the power plug into the wall outlet.
First turn the power on for other components that are
connected to the projector.
For a video source, press the [Play] button.
Projection starts after a short period.
(Operation) indicator
Flashes green (warm-up in progress/approx. 40 seconds)
→ Lights green (projection in progress)
With the EMP-9300, the Password Protect setting may cause
the password entry screen to be displayed when the power is
turned on. If this happens, enter the password.
Preventing theft (Password Protect)
User's Guide "
User's Guide
"Turning the Projector On"
User's Guide "Advanced2 Menu"
"