Epson EMP-S3 설정 매뉴얼 - 페이지 5
{카테고리_이름} Epson EMP-S3에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-S3 25 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP-S3에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지), 빠른 시작 매뉴얼 (12 페이지)
페이지 인쇄
Adjusting Position and Focus
(Setting up for the first time or after moving)
Raising the Projection Position (Adjusting the front foot)
When moving the projector, make sure
the front foot is retracted.
Correcting Keystone Distortion
You can adjust the vertical tilt to a maximum of
about 30°*(20° when projecting a component
video image with a ratio of 16:9).
Wide Top
* The greater the angle of tilt, the harder the
image is to focus. Setup the projector at a lower
angle of tilt.
Adjusting Focus
A f t e r k e y s t o n e c o r re c t i o n a n d
sharpness adjustments, the image
may be unfocused.
If keystone correction or zoom adjustments are performed, the "Image Shift" adjustment screen is
displayed.
User's Guide "Adjusting the Projection Position (Image Shift)"
Turning the Projector off
Turn off all connected equipment.
Press
twice on the remote
control or control panel.
Normal
Wide Base
Foot Adjust
Lever
You can adjust the front foot to raise the
projection angle up to a maximum of 10°.
• You can also make keystone
corrections from the configuration
menu.
User's Guide "Settings Menu"
• Hold down
t h a n o n e s e c o n d t o r e s e t t h e
correction value to the default
setting.
• Adjust the horizontal tilt by turning
the left rear foot.
Rear Adjustable
Foot
Extend
Adjusting Projection Size
Enlarge
After the confirmation buzzer beeps
twice, unplug the power cable.
Electricity is consumed if only the projector's
power is turned off.
Attach the lens cover.
and press
for more
Retract
Reduce