Cisco 3640 Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Cisco 3640 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3640 Series 10 페이지. Rack-mount and wall-mount
Cisco 3640 Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (37 페이지), 사용자 설명서 (26 페이지), 매뉴얼 (10 페이지), 구성 참고 사항 (18 페이지)

페이지 인쇄

Required Tools and Equipment

You need the following tools and equipment to install the center-mount brackets:

•

Attaching the Center-Mount Brackets to the Chassis

You can use the center mount brackets to install the Cisco 3640 chassis with either the front panel or the

rear panel facing forward. The bracket orientation and attachment holes used are different for

front-facing and rear-facing installations.

Complete the applicable procedure below, depending on the required chassis orientation in the rack.

Front-Panel Forward Installation

Attach one bracket to each side of the Cisco 3640 chassis as shown in Figure 1.

•

Figure 1

The second bracket attaches to the other side of the chassis.

Use holes numbered 1 for front-panel forward.

78-11336-01

Number 2 Phillips screwdriver

Screws for rack mounting

Position the angled end of the bracket flush with the rear of the chassis.

Insert the four screws at the rear into the bracket holes numbered "1."

Insert the two screws at the front into the two lined-up holes.

Bracket Attachment with Front Panel Facing Forward

1 2 3

ACTIV E

READ Y

PCM CIA

Center-Mount Bracket Installation Guide for Cisco 3640 Routers

Required Tools and Equipment