Epson EMP-TS10 운영 매뉴얼 - 페이지 30

{카테고리_이름} Epson EMP-TS10에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-TS10 36 페이지. Home theatre projector
Epson EMP-TS10에 대해서도 마찬가지입니다: 사양 (1 페이지), 설정 매뉴얼 (22 페이지), 포장 풀기 및 설치 매뉴얼 (2 페이지)

Epson EMP-TS10 운영 매뉴얼
Using the control functions

Procedures for new timer settings

f
2
When you click "Add", the following window is
displayed and the new timer settings are applied.
At "Operation", you can carry out the operations of turning the
power on and off and switching the input sources, similarly for
the control buttons on the main window. If you set the input
source switching, the projector's power will turn on at the timer
start time even if it is not on at the time. Because of this, it is not
necessary to make two separate timer settings for turning the
power on and switching the input source.
3
After completing the timer settings, click [OK].
The timer settings that have been made will be registered and
they can be checked in the displayed timer list.
TIP
You can enable and disable all of the timer settings that have been
registered. Select "Timer" - "Enable" or "Disable" from the "Tool"
menu.
29