Epson EMP-TW100 사용자 설명서 - 페이지 8

{카테고리_이름} Epson EMP-TW100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP-TW100 9 페이지. Home theatre projector
Epson EMP-TW100에 대해서도 마찬가지입니다: 브로셔 및 사양 (24 페이지), 설정 매뉴얼 (10 페이지), 설정 매뉴얼 (12 페이지)

페이지 인쇄

1. Table of Contents

5.Appendix

A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the

projector..

Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000,

TW3000/TW4000/TW5000)

• Select RS-232C at Advanced Setting of the Menu.

• Communication condition

Baud rate

Data length

Parity

Stop bit

Flow control

• Connector

• Projector input

*Theres no effect if DTR and DSR are not used.

USB Connection (TS10,TW200,TW500,TW200H,TW420)

• TS10, select USB at Advanced Setting of the Menu.

• Epson USB VCOM Driver has to be installed in your computer to use USB fpr communication.A COM port is added to your

computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)

in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).

• Connector

ESC/VP21 Communication Manual Home

: 9600 bps

: 8 bits

: No

: 1 bit

: No

: D-sub 9pin

: Control(RS-232C)

(PC serial cable)

GND

Signal name

GND

: USB(B type)

Function

Common ground

Transmitted data

Received data

8 of 9

GND