Cisco 4000 Series 매뉴얼 - 페이지 4

{카테고리_이름} Cisco 4000 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 4000 Series 18 페이지. Upgrading memory
Cisco 4000 Series에 대해서도 마찬가지입니다: 설치 준비 (11 페이지), 설치 매뉴얼 (18 페이지), 교체 매뉴얼 (16 페이지), 업그레이드 매뉴얼 (24 페이지)

페이지 인쇄
Cisco 4000 Series 매뉴얼

Series Specifications

Series Specifications
Design specifications for the Cisco 4000 series are as follows:
•
Modular router platform.
•
Flash memory capability.
•
User-upgradable network processor modules, shared memory, and processor local
memory.
•
Hardware thermal alarm to warn of excessively high operating temperature.
•
Can be rack-mounted in either a standard 19-inch rack or a telco rack.
•
Can be mounted on a wall or placed on a desk or table.
•
Support for up to three network processor modules at a time. Network processor
modules can be placed in any of the three available positions in almost any desired
combination. See the Cisco Product Catalog for complete configuration details.
The BRI four-port and eight-port network interface modules can not be used in the same
chassis with the channelized T1/ISDN PRI network interface module or the channelized
E1/ISDN PRI network interface module.
The Cisco 4000-M does not support Fast Ethernet, HSSI, 2T16S, ATM, or six-port Ethernet
network processor modules.The Cisco 4000-M can support only one FDDI network
processor module in combination with any two other types of network processor modules.
The Cisco 4500-M and Cisco 4700-M can support two FDDI network processor modules.
If you are only using one FDDI module, install it in the center slot for optimum heat
dissipation.
The Cisco 4500-M and Cisco 4700-M can support one ATM network processor module or
up to three six-port Ethernet network processor modules. The single-port Ethernet module
is not supported on the Cisco 4500-M or the Cisco 4700-M.
Note
the single-port Ethernet network processor module.
1-4 Cisco 4000 Series Installation Guide
The Cisco 4500-M and Cisco 4700-M support all network processor modules except