Epson EX7200 사용자 설명서 - 페이지 18

{카테고리_이름} Epson EX7200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EX7200 37 페이지. Warranty statement
Epson EX7200에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 설정 (4 페이지), 적합성 선언 (4 페이지)

페이지 인쇄

note

Lamp life will vary

depending upon mode

selected, environmental

conditions, and usage.

Turn off this product when

not in use to prolong the life

of the projector.

You can set the projector to

automatically turn off the

lamp and enter "sleep mode"

when it has not received any

signals for 1 to 30 minutes

(see page 76). This conserves

electricity, cools the

projector, and extends the

life of the lamp. If you want

to start projecting again,

press the P power button.

If you are done using the

projector, unplug the power

cord.

Setting Up the Projector

Shutting Down the Projector

This projector incorporates Instant Off technology. To turn it off, you

can press its Ppower button as described below, unplug it, or turn off

a power switch that supplies power to the projector. You don't have to

wait for the projector to cool down first.

1. To turn off the projector, press the Ppower button on the remote

control or projector.

You see a confirmation message.

(If you don't want to turn it off,

press any other button.)

2. Press the Ppower button again. The projection lamp turns off

and the projector beeps twice. You can then unplug the power

cord.

If you want to turn the projector on again, make sure the orange

Ppower light is not flashing, then press the Ppower button.