Cisco 7000 and 7507 Chassis CHAS-7K 교체 지침 매뉴얼 - 페이지 2

{카테고리_이름} Cisco 7000 and 7507 Chassis CHAS-7K에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7000 and 7507 Chassis CHAS-7K 48 페이지. Cisco systems cisco 7000 and cisco 7507 chassis replacement instructions

페이지 인쇄

Product Overview

The Cisco 7000 and Cisco 7507 replacement chassis comprise the sheet metal housing, front chassis

panels, and all internal components (MAS-7K and MAS-7507, respectively). An optional

replacement chassis is shipped with a spare power supply (CHAS-7K and CHAS-7507,

respectively).

The rear of the chassis contains the seven processor slots and the two power supply bays. The

processor slots in the replacement chassis contain blank board carriers, which you will remove

individually as you install the interface processors from the old system. You will complete the

system by installing the processor modules and power supplies that you remove from your existing

system.

All of the components you will move to the new chassis are accessible from the rear of the chassis.

The descriptions that follow assume that you are viewing the chassis from the rear, or

interface-processor end, which is the orientation of the Cisco 7000 shown in Figure 1 or the

Cisco 7507 shown in Figure 2.

Figure 1

Captive

installation screw

Upper

power supply

Captive

installation screw

Lower

power supply

2 Cisco 7000 and Cisco 7507 Chassis Replacement Instructions

Cisco 7000 Chassis Rear View

Slot 0

SSP

slot