Cisco 7100 Series 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 7100 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7100 Series 25 페이지. Field-replaceable units in vpn routers
Cisco 7100 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (21 페이지)

페이지 인쇄
Cisco 7100 Series 빠른 시작 매뉴얼
Connect the Router to the Network
(continued)
To ATM network
Connect the ATM SMI3 and
MM3 Ports
The SMI3 (OC-3c/STM-1 single-mode
intermediate reach) and MM3
(OC-3c/STM-1 multimode) ports provide
an interface to ATM networks and transmit
and receive data at rates of up to 155 Mbps
bidirectionally. The SMI3 and MM3 ports
connect to a SONET/SDH single-mode or
multimode optical fiber cable. Use one
duplex SC-type connector or two simplex
SC-type connectors.
Warning
Class 1 laser product.
Warning
Because invisible laser
radiation may be emitted from the
aperature of the port when no fiber
cable is connected, avoid exposure
to laser radiation and do not stare
into open apertures.
5
I
155 - MM
RX
TX
EN
RX
CEL CAR ALM
ATM 1/0
equipment
1
Attach the fiber-optic cable (either one
duplex SC-type connector or two
simplex SC-type connectors) directly to
the receptacle on the router.
2
Attach the network end of the cable to
an external DSU (an ATM network).
Note: For information on SONET
specifications for fiber-optic transmissions,
power budget, and power margins for
multimode and single-mode transmissions,
refer to Appendix C, "Cable Specifications,"
in the Cisco 7100 Series VPN Router
Installation and Configuration Guide.
11