Epson MovieMate 30s 빠른 매뉴얼 - 페이지 19

{카테고리_이름} Epson MovieMate 30s에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson MovieMate 30s 32 페이지. Projector, cd/dvd player and speakers
Epson MovieMate 30s에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (6 페이지), 설정 (9 페이지), 제품 지원 게시판 (4 페이지), 제품 지원 게시판 (4 페이지), 사양 (2 페이지)

페이지 인쇄

Using the Wireless Audio Set

Powering On Your Equipment

1. Push the P button on the transmitter. The P light turns solid green.

2. Push the P button on the receiver. The P light turns solid green.

3. Make sure that the

Note:

If the LINK lights are not solid green, there is no connection between the

transmitter and receiver. Make sure that there is direct line of sight between

the two antennas and that the transmitter and receiver are less than 19.7 feet

(6 meters) apart. If the LINK lights are still not solid green, see "Solving Problems"

on page 21.

4. Turn on your Epson MovieMate or DVD player.

5. Turn on your audio system. You're ready to start watching a movie.

Note:

If the transmitter doesn't receive an audio signal for more than 5 minutes, it will

automatically go into standby mode. If it still hasn't received an audio signal after

25 minutes, it will turn off automatically. Press the P button to turn it back on again.

If you don't have any audio output, make sure that the volume control on your

audio system is not turned all the way down or muted; see "Controlling Volume"

on page 20. If you still don't hear any audio, see "Solving Problems" on page 21.

light on the transmitter and receiver is solid green.

LINK

Using the Wireless Audio Set