C.T.M. HS-580 지침 책자 - 페이지 13

{카테고리_이름} C.T.M. HS-580에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. C.T.M. HS-580 18 페이지. 5 series

5-Series

ASSEMBLING YOUR SCOOTER

To assemble the scooter, you can repeat the disassembly directions in reverse.

Abbreviated directions are given below. Refer to the Figures on pages 11 - 12 to

locate the parts.

1.Use the Steering Column Lever to move the Steering Column up out of the way.

2.Tilting the rear end to a horizontal position, insert the scooter frame tube of the front

end into the rear section first, making sure that the locking pins are removed.

3.Slide the two sections of the unit together until the front half reaches its limit.

4.Insert the two locking pins into their corresponding holes. Both locking pins must be

fully inserted whenever the scooter is assembled.

5.Place batteries, use Velcro to fix the position and attach the battery power plugs.

6.Place rear shroud.

7.Screw together controller wiring harness.

8.Place rear storage cover.

9.Loose Seat Rotation Lever counterclockwise. Place seat on seat post. Tighten Lever

again by turning clockwise. Lock Seat Control Lever on bottom of seat before sitting

down.

Instruction Booklet