ABB ACH580 Series 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} ABB ACH580 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB ACH580 Series 15 페이지. Floating point control
ABB ACH580 Series에 대해서도 마찬가지입니다: 설정 방법 (2 페이지)
페이지 인쇄
Check the direction of the motor.
If it is forward, select Yes, motor is spinning forward and
press
(Next) to continue.
If the direction is not forward, select No, fix direction and
press
(Next) to continue.
The first start is now complete and the drive is ready for use.
Press
(Done) to enter the Home view.
The Home view monitoring the values of the selected signals
is shown on the panel.
You can complete the commissioning in five different ways:
• Start using the drive with no further adjustment:
Press the Hand key
Hand
• Assistant commissioning:
Go to Menu → Primary settings → Start, stop reference and complete the two assistants. For more details
see the Firmware manual.
• HVAC quick commissioning:
Go to Menu → Primary settings → HVAC quick setup. Go through the items on the menu. This option is
instructed in the rows below.
• Commissioning with Primary settings:
Go to Menu → Primary settings. Set the start/stop and reference, motor data, ramps and limits. You can
continue with further adjustment. See in the Firmware manual or press the
menu items.
• Commissioning with parameters (advanced users only.):
Go to Menu → Parameters → Complete list. See chapter Parameters in the Firmware manual.
HVAC quick commissioning
2 – Completion of commissioning
on the panel to start the motor, and set the reference on the panel.
EN – Quick start-up guide 7
information on Primary settings
EN