Cisco Linksys SGE2000P 데이터시트 - 페이지 3
{카테고리_이름} Cisco Linksys SGE2000P에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Linksys SGE2000P 6 페이지. 24-port gigabit switch: poe
Cisco Linksys SGE2000P에 대해서도 마찬가지입니다: 릴리스 노트 (16 페이지), 데이터시트 (6 페이지), 펌웨어 업그레이드 매뉴얼 (5 페이지), 매뉴얼 (6 페이지)
![Cisco Linksys SGE2000P 데이터시트](/uploads/products/server2/553856/553856.png)
Feature
LEDs
PoE
IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 ports; power budget allows for max power of 15.4W on up to 12
ports simultaneously.
Performance
Switching capacity
Forwarding rate
(based on 64-byte packets)
Stacking
Stack operation
Layer 2
MAC table size
Number of VLANs
VLAN
Head-of-line (HOL) blocking
Layer 3
Layer 3 options
IPv6
IPv6
IPv6 QoS
IPv6 ACL
MLD Snooping
IPv6 Applications
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
Up to 48 Gbps, nonblocking
Up to 35.7 mpps
● Up to 8 units in a stack (192 ports)
● Hot insertion and removal
● Ring and chain stacking options
● Master and backup master for resilient stack control
● Auto-numbering or manual configuration of units in stack
8000
256 active VLANs (4096 range)
● Port-based and 802.1Q tag-based VLANs
● Protocol-based VLAN
● Management VLAN
● PVE
● GVRP
HOL blocking prevention
● Static routing
● CIDR (classless interdomain routing)
● 128 static routes
● IPv4
● Forwarding in silicon – wire-speed forwarding of Layer 3 traffic
IPv6 Host Mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 Neighbor and Router Discovery (ND)
IPv6 Stateless Address Autoconfiguration
Path MTU Discovery
Duplicate Address Detection (DAD)
ICMPv6
IPv6 over IPv4 network with ISATAP tunnel support
Prioritize IPv6 packets in hardware
Drop or Rate Limit IPv6 packets in hardware
Deliver IPv6 multicast packets only to the required receivers
Web/SSL, Telnet Server/SSH, Ping, Traceroute, SNTP, TFTP, Radius, Syslog, DNS Client
Data Sheet
Page 3 of 6