Cisco Linksys WRK54G 사용자 설명서 - 페이지 30

{카테고리_이름} Cisco Linksys WRK54G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Linksys WRK54G 40 페이지. 2.4ghz 802.11g wireless-g

Wireless-G Broadband Router

RADIUS. This option features WEP used in coordination with a RADIUS server. (This should only be used when a

RADIUS server is connected to the Router.) First, enter the RADIUS server's IP Address and port number, along

with a key shared between the Router and the server. Then, select a Default Transmit Key (choose which Key to

use), and a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. Last, either generate a

WEP key using the Passphrase or enter the WEP key manually.

WEP. WEP is a basic encryption method, which is not as secure as WPA. To use WEP, select a Default Transmit Key

(choose which Key to use), and a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. Then

either generate a WEP key using the Passphrase or enter the WEP key manually.

Change these settings as described here and click the Save Settings button to apply your changes or Cancel

Changes to cancel your changes. For detailed instructions on configuring wireless security for the Router, turn to

"Appendix B: Wireless Security."

Chapter 5: Configuring the Wireless-G Broadband Router

The Wireless Tab - Wireless Security

Figure 5-23: Wireless Tab - Wireless Security (RADIUS)

IMPORTANT: If you are using WEP encryption, always remember

that each device in your wireless network MUST use the same

WEP encryption method and encryption key, or else your wireless

network will not function properly.