CAB E4/300 빠른 시작 사용 설명서 - 페이지 6

{카테고리_이름} CAB E4/300에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB E4/300 6 페이지. Barcode / label printer e4 series

Calibrating the printer is Required when installing label tape for the first

time or when changing label tape to a different size.

Calibration is Recommended when changing label tape and/or ink ribbons

to maintain correct label alignment.

1. Press and hold the CANCEL button until the three indicator lamps

blink, (approximately 4 seconds), then release the button.

2. Press and release the FEED button.

The printer will feed approximately 8 inches, (200 mm), of label tape

and the three lamps will stop blinking and remain lit.

The printer is now calibrated and ready for printing.

Step # 4. Calibrating the media sensor

To Calibrate the printer: