CAB EOS5/200 서비스 매뉴얼 - 페이지 15

{카테고리_이름} CAB EOS5/200에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB EOS5/200 20 페이지.

Replacing Assembly Units

2.10

Replacing the Power Supply Unit

Danger!

Risk of death via electric shock!

 Before opening the housing cover, disconnect the device from the mains supply and wait at least one

minute until the power supply unit has discharged.

Fig. 11

Replacing the power supply unit

1. Unplug the printer from the electrical outlet.

2. Remove the casing.

3. Dismount the PCB CPU  2.9 on page 14.

4. Unplug the cables from the connectors (4,5).

5. Loosen two screws (3).

6. Pull the power supply unit (1) from the pins (2).

7. Insert the new power supply unit and fix it with the screws (3).

8. Connect the cables at the connectors (4,5).

9. Re-mount the PCB CPU.

10. Mount the casing.