CAB ER4 Series 운영자 매뉴얼 - 페이지 9

{카테고리_이름} CAB ER4 Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB ER4 Series 14 페이지. External rewinder

Settings

4.1

With the setting of the winding direction it is possible to rewind the labels inside or outside.

Attention!

Risk of gear defect!

 Switch off the device before changing the winding direction.

ER4/210

Figure 4

Setting the winding direction

 Select the winding direction with the switch (1):

Rewinding with labels inside

Rewinding with labels outside

4.2

Depending on the used printer the guide axle should be adjusted so that the label strip is led horizontally from the

printer to the rewinder.

Figure 5

Adjusting the guide axle

ERx/300

ER4/210

1. Loosen the guide axle (1) by turning it

counterclockwise.

2. Move the axle in the guide plate (2) to the

desired position.

3. Fasten the guide axle (1) by turning it clockwise.

ERx/300