Cisco NCS 540 매뉴얼
{카테고리_이름} Cisco NCS 540에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 540 14 페이지.
Cisco NCS 540에 대해서도 마찬가지입니다: 설치 준비 (14 페이지)
페이지 인쇄Prepare for Installation
Before you install the Cisco NCS 540 large density routers, you must prepare your site for installation.
Preparing your site involves these tasks:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
General Precautions
Observe the following general precautions when using and working with your router:
• Keep your system components away from radiators and heat sources, and do not block cooling vents.
• Do not spill food or liquids on your system components, and never operate the product in a wet
• Do not push any objects into the openings of your system components. Doing so can cause fire or electric
• Position system cables and power supply cable carefully. Route system cables, the power supply cable,
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
General Precautions, on page 1
Site Planning Checklist, on page 2
Environmental Requirements, on page 2
Airflow Guidelines, on page 2
Recommended Airflow, on page 4
Site Power Guidelines, on page 4
Site Cabling Guidelines, on page 5
Interference Considerations, on page 6
Tools and Equipment, on page 7
Prepare Your Location , on page 7
Prepare Yourself , on page 8
Prepare Rack for Router Installation, on page 9
Cabinet Selection Guidelines, on page 9
Unpack the Cisco NCS 540 Large Density Routers, on page 10
environment.
shock by shorting out interior components.
and plug so that they are not stepped on or tripped over. Be sure that nothing else rests on your system
component cables or power cable.
modifications. Always follow your local and national wiring rules.
Prepare for Installation
1