Cisco NCS 5700 매뉴얼 - 페이지 9

{카테고리_이름} Cisco NCS 5700에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 5700 44 페이지.

Install the Chassis

Figure 7: Mount Slider Brackets

Step 4

Install the router onto the 2-post rack as follows:

a) Holding the router with both hands, position the back of the router between the front posts of the rack.

b) Move the router until the slider brackets come in contact with slider rails installed in the rack. Slide the slider brackets

onto the slider rails, and then gently move the router all the way into the rack.

c) Hold the chassis level while the second person inserts two pan-head screws (12-24) in each of the two rack-mount

brackets (using a total of four screws) and into the cage nuts or threaded holes in the vertical rack-mounting rails.

d) Tighten the 12-24 screws to 30 in-lb (3.39 N.m).

Slider brackets

Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders

Install the Chassis

Screws