CAB HS 60 운영자 매뉴얼 - 페이지 15
{카테고리_이름} CAB HS 60에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB HS 60 18 페이지. Label dispenser
페이지 인쇄4
Operation
4.2.2 Operation Modes
Check the operation mode by means of the LEDs (2 / 3 / 4).
Touch button
Automatic Peel-Off
After switching in the "Automatic peel-off" mode the first label will
immediately be fed to the peel position.
Take the label.
The next label will be fed to the peel position.
!
Attention!
Risk of unintended start-up.
Do not touch the feeler of the present sensor excepting the
error treatment.
Peel-Off on Demand
For peeling-off a label touch button
Take the label.
For peeling-off the next label touch button
Peel-Off on Demand with External Control
for devices with peripheral port only
If an external control is connected LED (2) is illuminated.
i
Notice!
With an external control connected the device cannot be switched to
the "Automatic peel-off" mode.
The release button
Send a start signal.
A label will be fed to the peel position
Take the label.
Send a new start signal.
for changing the operation mode.
has no function.
.
again.
15