Cisco NCS 6008 포장 풀기, 이동 및 고정 매뉴얼 - 페이지 12

{카테고리_이름} Cisco NCS 6008에 대한 포장 풀기, 이동 및 고정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 6008 44 페이지. 6000 series network convergence system routers unpacking, moving, and securing guide
Cisco NCS 6008에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄
Cisco NCS 6008 포장 풀기, 이동 및 고정 매뉴얼

Dolly Specifications

For more information about floor plans, clearance information, and planning for future space needs, see
the
Figure 1-1
Dolly Specifications
The optional dolly that is available for the Cisco NCS 6008 chassis is flexible enough to meet several
challenges common when first positioning a chassis of this size and weight. Such challenges include
limited hallway or doorway width, doorway thresholds, ramps, and tight corners along the transport
route. To overcome these challenges, use the dolly in either of the following configurations:
•
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
1-4
Cisco Network Convergence System 6000 Series Routers Site Planning Guide.
Drill Hole Template for the Cisco NCS 6008 Chassis
90-degree configuration—The dolly assemblies are shipped in this configuration. In some cases, this
configuration is needed to transport the chassis. Use the 90-degree configuration
move the chassis off the pallet. Extra care should be used in this configuration to ensure that the
chassis does not tip too far and fall during transport.
Chapter 1
(Figure
1-5) to
OL-29233-01