Cisco Nexus 7000 Series 설치 매뉴얼 - 페이지 17

{카테고리_이름} Cisco Nexus 7000 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Nexus 7000 Series 18 페이지. Switch chassis
Cisco Nexus 7000 Series에 대해서도 마찬가지입니다: 참조 매뉴얼 (2 페이지), 설치 지침 매뉴얼 (39 페이지), 참조 (34 페이지), 구성 (8 페이지), 구성 매뉴얼 (28 페이지), 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (29 페이지), 교체 지침 매뉴얼 (14 페이지), 교체 지침 매뉴얼 (21 페이지), 설치 매뉴얼 (16 페이지), 문제 해결 매뉴얼 (10 페이지)

Installation

Figure 15: Edit Virtual Machine Settings to Connect Floppy Drive to Read Configuration Settings from FLP File

e) In the Options tab, choose Advanced Settings > Boot Options and select Force BIOS Setup.

f) When you boot the virtual machine later, select the BIOS Boot menu, and then use the - key to move

Removable Devices down to the bottom of the boot list to ensure that the virtual machine boots from the

DVD drive.

Step 6

To begin installation of each application, follow these steps:

a) Power on the virtual machine, right click and choose Open Console as shown in Figure 13.

b) If you are not using installation answer files, follow the interactive installation procedure in the console.

Use the information that you collected in

c) Installation is complete and successful when you are able to successfully log in from the console.

• For Prime Collaboration, type

complete installation. After that, the installation script asks for network information and various credentials

(passwords for admin, root, globaladmin) information.

• For a VCS or Expressway server, set up the application by logging in using the default username (admin)

and password (TANDBERG). Type y when asked "Run install wizard [n]:" and continue with interactive

installation.

Note

What to Do Next

After installing all required applications, access applications using a web browser. Add licenses and configure

features as required.

setup

If you require detailed installation guidance, see the Installation Guide of the applications on the

Cisco Business Edition 7000 Support Documents website, listed in

Install Applications on Virtual Machines

Step 1, on page

15.

at the "localhost login:" prompt to configure the application and

Cisco Business Edition 7000 Installation Guide, Release 11.6

For More Information

section.