Ace MUSTANG Series 기술 참조 매뉴얼 - 페이지 12

{카테고리_이름} Ace MUSTANG Series에 대한 기술 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ace MUSTANG Series 19 페이지.
Ace MUSTANG Series에 대해서도 마찬가지입니다: 기술 참조 매뉴얼 (19 페이지), 기술 참조 매뉴얼 (19 페이지), 참조 매뉴얼 (19 페이지)

Ace MUSTANG Series 기술 참조 매뉴얼
Battery
Handle used batteries carefully. Do not damage the battery in any way; a damaged battery
may release hazardous materials into the environment. Do not discard a used battery in
the garbage or a public landfill. Please comply with the regulations set up by your local hazardous
waste management agency to dispose of your used battery properly.
Location: The battery is located on the bottom rear of the laptop, see illustration below.
Type and number of fastenings: Interference snap fit
Tools required: None.
Procedure:
Step 1: Ensure the computer is off,
unplugged, and
any potential
energy is dissipated. Turn the
laptop over.
Step 2: Slide the latch "1" in the
direction of the arrow.
Step 3: Slide the latch "2" in the
direction of the arrow, and hold it
in place.
Step 4: Lift the battery "4" out in the direction of the arrow from point "3".
Reinstallation
Step 5: Turn the computer off, and turn it over.
Step 6: Slide the battery into the battery bay, until "1" and "2" securely latch in place.
Disposal:
Selective Treatment/ Special Handling Per Annex VII, Directive 2012/19/EU: A lithium-ion
battery resides on the bottom rear of the laptop and a lithium-ion coin cell battery resides
on the motherboard within the laptop. Both batteries must be removed separately from
the laptop and shall be disposed or recovered in compliance with Directive 2008/98/EC.
ACE126
12