Cisco Nexus 9000 Series 설치 - 페이지 3

{카테고리_이름} Cisco Nexus 9000 Series에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Nexus 9000 Series 8 페이지. Switch chassis
Cisco Nexus 9000 Series에 대해서도 마찬가지입니다: 빠른 시작 구성 매뉴얼 (6 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (32 페이지), 매뉴얼 (30 페이지), 설치 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (14 페이지), 매뉴얼 (16 페이지)

페이지 인쇄
Cisco Nexus 9000 Series 설치
Installing the Switch Chassis
Tip
Keep the shipping container in case the chassis requires shipping at a later time.
Before you begin
Before you unpack the switch and before you handle any switch components, be sure that you are wearing a
grounded electrostatic discharge (ESD) strap. To ground the strap, attach it directly to an earth ground or to
a grounded rack or grounded chassis (there must be a metal-to-metal connection to the earth ground).
Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation

Attaching L-Brackets to the Chassis

You attach two L-brackets to each side of the chassis. These brackets hold the chassis in place on a flat surface.
Before you begin
• You must have the following tools and equipment:
Step 1
Align the hole in the L-bracket with the hole on the side of the chassis. Attach the L-bracket with a screw using a
Phillips-head screwdriver. See the following figure.
• Phillips-head screwdriver
• L-brackets (4) and screws (4)
Attaching L-Brackets to the Chassis
Installing the Switch Chassis
3