Cisco NM-1FE-TX - Interface Module Ethernet 데이터시트 - 페이지 5
{카테고리_이름} Cisco NM-1FE-TX - Interface Module Ethernet에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NM-1FE-TX - Interface Module Ethernet 8 페이지. 2600/3600/3700 series lan connectivity modules
페이지 인쇄
Cabling—RJ-45 connector for the 10/100baseTX interface and either RJ-45 connectors for the ISDN/PRI with
integrated CSUs, or DB-15s for non-CSU and E1 versions. The following table provides cabling product numbers
and descriptions:
Cable Description
T1 RJ45-RJ45 Straight-Through Cable
DB-15 to DB-15 Straight-Through Cable
DB-15 to DB-15 Null Cable
E1 Cable DB15 to RJ45
E1 Cable DB-15 to DB-15
E1 Cable Twinax 120 ohm Balanced
E1 Cable BNC 75 ohm Unbalanced
LEDs—Network Module status indicator, FDX indicator, 10/100-Mbps indicator, link indicator, and collision
indicator in reference to the 10/100baseTX, Carrier Detect, Remote Alarm, Local Alarm, and Loop indicators
for T1/E1.
Network Interfaces—One RJ-45 10/100baseTX interface and either one or two RJ-45 for integrated CSU versions
or one or two DB-15s for the T1/E1 connections.
Ethernet Connectivity
Five available network modules offer four-port, single-port, and dual-port Ethernet LAN connectivity in the
Cisco 3600 series for maximum configuration flexibility as a multifunction platform.
Mixed Media Network Modules
The mixed-media network modules allow administrators to configure an Ethernet port (or two ports) with additional
WAN connections using the WAN interface cards on the same module to conserve slot space.
For example, as part of a multifunction solution, a Cisco 3620 platform with a 2E2W can support two Ethernet
LANs, together with two serial/ISDN backhaul lines, andstill allow multiple serial or ISDN in the same chassis. This
solution outperforms the competition in industry-leading price/performance.
Four-Port Ethernet Module
The four-port Ethernet network module provides industry-leading price/performance, enabling high-density Ethernet
connectivity. The four-port Ethernet network module offers a lower price point for multifunction solutions that
require higher-density Ethernet than the mixed-media network modules.
An example is a Cisco 3640 platform with a four-port Ethernet network module, 16-port ISDN Basic Rate Interface
(BRI), and a 32-port Asynchronous serial network module.
This configuration integrates branch office routing requirements with four Ethernet LAN segments and the mixed
dial requirements of sync/async serial lines and ISDN.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Product Number
CAB-DSU-RJ45
CAB-7KCT1DB15
CAB-7KCT1NULL
CAB-E1-PRI
CAB-E1-DB15
CAB-E1-Twinax
CAB-E1-BNC
Cisco Systems, Inc.
Page 5 of 8