CAB 4214 Series 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} CAB 4214 Series에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB 4214 Series 14 페이지. Stroke-turn applicator

페이지 인쇄

Product Description

2.1

Important Features

•

The supporting air, the vacuum as well as the speed of the cylinder are adjustable. That way the applicator can be

adapted to different label materials and sizes.

•

To avoid contamination within the vacuum channels, tamps are cleaned by an air pressure pulses after each

application.

•

For operation within a system the I/O interface of the printer can be used.

2.2

Technical Data

Label transfer method

Label width

in mm for

Label height

in mm for

Compressed air pressure

Sound pressure level

Product during

labeling

Labeling onto the

product

Product height

Horizontal swing angle 90°, 180°, 0°

Product distance to lower edge

at cylinder stroke

Immersion depth pad F

Cycle time about frequency/min.

Table 1

Technical Data

Determined at 100 mm stroke below device / smallest label height / print speed 100 mm/s.

Immersion depth at applicator >25 mm, the cover of the HERMES Q / Hermes + must be modified.

HERMES Q2 / Hermes + 2

HERMES Q4 / Hermes + 4

HERMES Q2 / Hermes + 2

HERMES Q4 / Hermes + 4

fixed

in motion

from the top

from below

sideways

fixed

variable

200 mm up to mm

300 mm up to mm

400 mm up to mm

up to mm

Tamp pad

with foam

4214 L/R 11 F

4214 L/R 12 F

4 - 58

10 - 58

10 - 80

4 - 40

8 - 40

0,45 MPa (4,5 bar)

unter 74 dB(A)

135

235

335

Tamp pad

Blow pad

with label stop

4214 L/R 61 F

4214 L/R 2100

10 - 58

10 - 80

4 - 40

10 - 40

8 - 40

10 - 40

135

140

235

240

335

340