Cisco ONS 15600 참조 매뉴얼 - 페이지 13

{카테고리_이름} Cisco ONS 15600에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ONS 15600 29 페이지. Install the bay and backplane connections
Cisco ONS 15600에 대해서도 마찬가지입니다: 카드 설정 변경 (14 페이지), 매뉴얼 (10 페이지), 참조 매뉴얼 (22 페이지), 설치 지침 매뉴얼 (14 페이지)

페이지 인쇄
Cisco ONS 15600 참조 매뉴얼
Chapter 2
Cards Features and Functions

2.5.3 OC48/STM16 SR/SH 16 Port 1310 Card-Level Indicators

Table 2-10
card.
Table 2-10
Indicator
STAT LED
SRV LED
LASER ON

2.5.4 OC48/STM16 SR/SH 16 Port 1310 Network-Level Indicators

Table 2-11
card.
Table 2-11
Indicator
SD LED
SF LED

2.5.5 OC48/STM16 SR/SH 16 Port 1310 Card OGI Connector Pinout

Table 2-12
Table 2-12
OC48/STM16 SR/SH 16 Port 1310 Card OGI Connector Pinout
Connector
OGI Pin and Card Port
1
1
Transmit 4
2
1
Transmit 8
3
1
Transmit 12 Receive 12
describes the functions of the card-level LEDs on the OC48/STM16 SR/SH 16 Port 1310
OC48/STM16 SR/SH 16 Port 1310 Card-Level Indicators
Color
Description
Red
Indicates a hardware fault; this LED is off during normal operation.
Replace the card if the STAT LED persists. During diagnostics, the LED
will flash quickly during initialization and flash slowly during
configuration synchronization.
Green
The service mode of the card. Green indicates that the card is in use,
amber indicates that the card is out of service, and off indicates that the
card is either booting or has no power applied.
Green
The green LASER ON LED indicates that at least one of the card's lasers
is active.
describes the functions of the network-level LEDs on the OC48/STM16 SR/SH 16 Port 1310
OC48/STM16 SR/SH 16 Port 1310 Network-Level Indicators
Color
Description
Blue
The blue SD LED indicates a signal degrade or condition such as a low
level signal on at least one of the card's ports.
Red
The red SF LED indicates a signal failure or condition such as LOS,
LOF, or high BERs on at least one of the card's ports. The red SF LED
also turns on when the transmit and receive fibers are incorrectly
connected. When the fibers are properly connected, the LED turns off.
shows the OC48/STM16 SR/SH card OGI connector pinouts.
2
3
Receive 4
Transmit 3
2
3
Receive 8
Transmit 7
2
3
Transmit 11 Receive 11
2.5.3 OC48/STM16 SR/SH 16 Port 1310 Card-Level Indicators
4
5
Receive 3
Transmit 2
4
5
Receive 7
Transmit 6
4
5
Transmit 10 Receive 10
Cisco ONS 15600 Reference Manual, R5.0
6
7
Receive 2
Transmit 1
6
7
Receive 6
Transmit 5
6
7
Transmit 9
8
Receive 1
8
Receive 5
8
Receive 9
2-13