Cisco RV130W 빠른 매뉴얼

{카테고리_이름} Cisco RV130W에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RV130W 3 페이지. How to reboot and reset to factory default settings
Cisco RV130W에 대해서도 마찬가지입니다: 기능 및 사양 (5 페이지), 빠른 시작 매뉴얼 (13 페이지)

페이지 인쇄
Cisco RV130W 빠른 매뉴얼
How to Reboot and Reset to Factory Default
Settings on the RV130 and RV130W
Objective
The factory default reset erases all configuration settings that have been modified by the
user, and restores the device to its original settings. This may be helpful if you lose the
password to a device and wish to regain access. Performing a reboot restarts the device with
a saved configuration.
The objective of this document is to show you how to reset to factory default settings and
how to reboot the RV130 and RV130W.
Applicable Devices
• RV130
• RV130W
Software Version
• v1.0.1.3
Reset to Factory Default Settings
The router can be reset to the factory default settings through either the web configuration
utility or the reset button on the back of the router.
Reset with the use of the Web Configuration Utility
Step 1. Log in to the web configuration utility and choose Administration > Restore
Factory Defaults. The Restore Factory Defaults page opens:
Step 2. To reset the device, click the Default button. This will erase all current
configurations.