Cisco RV132W 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Cisco RV132W에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RV132W 14 페이지. Adsl2+ wireless-n vpn router
페이지 인쇄
Cisco RV132W Features
2
Front Panel
Power
Solid green when the device is powered on and booted.
Flashing green when the device is booting or loading the
firmware.
Solid red when the device fails to reboot, or system error,
or is in firmware recovery mode.
Off when the device is powered off.
Internet
Off when the ADSL2+/WAN LED is OFF.
Solid green when the device has a DSL WAN IP or
Ethernet WAN IP connection.
Flashing green when the device is sending or receiving
data through the DSL WAN.
Solid red when the device has no DSL WAN IP or
Ethernet WAN IP connection.
ADSL2+/
Off when the device is powered off or the device is
Ethernet
configured to use ADSL2+/Ethernet WAN yet has no
WAN
ADSL2+/Ethernet link.
Solid green when the DSL link has been activated.
Flashing green when the device is negotiating with the
DSLAM.
Solid blue when the Ethernet link is on.
Flashing blue when the device is transmitting/receiving
through Ethernet WAN.
LAN (1-3)
The numbered lights correspond to the LAN ports on the
back panel.
Solid green when the corresponding port is connected to
a device. Flashing green when the port is sending or
receiving data.
WLAN 2.4G
Off when the 2.4GHz wireless module is disabled.
Flashing green when the wireless radio is transmitting or
receiving data.
Solid green when the 2.4GHz wireless module is enabled.
Cisco RV132W ADSL2+ Wireless-N VPN Router Quick Start Guide
3