Cisco RV260W 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Cisco RV260W에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RV260W 13 페이지.
페이지 인쇄
plug-in, or the Apple Mac Safari browser, you can find the
router on your local network without knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple's website by visiting:
http://www.apple.com/bonjour/.
Launch a web browser, such as Microsoft Internet Explorer or
S
3
TEP
Mozilla Firefox.
In the address bar, enter the default IP address of the device,
S
4
TEP
https://192.168.1.1. A site security certificate, message is
displayed. The Cisco RV260W uses a self-signed security
certificate. This message appears because the device is not
known to your computer.
Enter the default user name: cisco and password: cisco in the User
S
5
TEP
Name and Password fields.
Click Login.
S
6
TEP
Follow the Setup Wizard instructions to finish the router installation.
S
7
TEP
We strongly recommend that you use the Setup Wizard for the first
installation.The Setup Wizard turns on the Wi-Fi radio, which allows
you to connect wirelessly. For more advanced configurations, see
the Administration Guide. A link to the Administration Guide is
found in
Congratulations, you can now start using your router.
Changing the Administrator Username and Password
To change the Administrator username and password on the device:
From the Getting Started page, select Change Administrator
S
1
TEP
Password or select System Configuration > User Accounts from
the navigation bar.
Check a username from the Local User Membership list and click
S
2
TEP
Edit.
Enter the Username.
S
3
TEP
Enter the old Password.
S
4
TEP
Enter the new Password.
S
5
TEP
Confirm the new Password.
S
6
TEP
Select the group (admin, guest) from the drop-down list in the
S
7
TEP
Password Strength Meter.
8
Where to Go from
Here.
Cisco RV260W Router Quick Start Guide