Cisco SGE2000 릴리스 노트 - 페이지 12

{카테고리_이름} Cisco SGE2000에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SGE2000 16 페이지. Nx-os fabric extender
Cisco SGE2000에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (32 페이지), 데이터시트 (5 페이지), 펌웨어 업그레이드 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 구성 매뉴얼 (46 페이지)

RELEASE NOTES

Linksys One Ready Communications Solution

STP Root Guard

Network administrators may want to prevent devices outside of the core of the network from being

assigned the spanning tree role of "root". Spanning Tree Root Guard is used to prevent an unauthorized

device from becoming the root of a spanning tree.

If root guard is enabled on a port, it is never selected as the STP root port; the roles it can be assigned are:

Designated, Alternate, Backup or Disabled. Root guard functionality enables detection and resolution of

miss configurations, while preventing loops or loss of connectivity.

BPDU filtering (when STP is disabled)

On a LAN interconnected by multiple bridges, Spanning Tree selects a controlling Root Bridge and Port

for the entire bridged LAN, and a Designated Bridge and Port for each individual LAN segment. When

traffic passes from one end station to another across the LAN, it is forwarded through the designated

Bridge/Port for the LAN segment, to the Root Bridge, which in turn forwards the traffic to the designated

Bridges/Ports on the opposite side. Bridges use Bridge Protocol Data Units (BPDUs) to communicate

Spanning Tree information.

Link Aggregation

Up to eight Aggregated Links may be defined, each with up to eight member ports, to form a single Link

Aggregated Group (LAG). This enables:

Fault tolerance protection from physical link disruption

•

Higher bandwidth connections

•

Improved bandwidth granularity

•

High bandwidth server connectivity LAG is composed of ports with the same speed, set to full-

duplex operation

Link Aggregation and LACP

LACP uses peer exchanges across links to determine, on an ongoing basis, the aggregation capability of

various links, and continuously provides the maximum level of aggregation capability achievable

between a given pair of systems. LACP automatically determines, configures, binds and monitors the

port binding within the system.

Access Control Lists (ACLs)

Access Control Lists (ACLs) are a general mechanism to inspect incoming frames and classify them into

named logical groups based on various criteria. Each such group may have specific actions that are

carried out on each frame classified as a member of that group.

•

IP ACL classification

•

MAC Access Lists

•

ACL actions

Linksys One Ready Communications Solution SFE2000/SFE2000P and SGE2000/

1 February 2007

SGE2000P